AEMC 8220 2130.95 MR193-BK Single Phase Power Quality Meter Analyzer

AEMC 8220 2130.95 MR193-BK Single Phase Power Quality Meter Analyzer

Your Price: $1,345.67
Part Number:4176

AEMC 8220 2130.95 MR193-BK Single Phase Power Quality Meter Analyzer

The AEMC 8220 with AmpFlex MR193-BK is a single phase AC/DC power meter with an electroluminescent backlit LCD display, is rated to 600 Volts Cat III, and is designed for control and maintenance engineers, technicians, as well as electrical educators and contractors.

 

The 8220 is a measurement instrument for distribution network disturbances and electrical parameters, allowing the user to obtain instantaneous measurements of the main characteristics of a single phase network (current, voltage, current harmonics, voltage and power, etc.) and to monitor operating machinery (distance of windings, inrush current and duration of operation, temperature, and rotational speed).

 

The 8220 has an accuracy better than 1 percent (excluding current sensors). It has a great degree of flexibility due to AEMC’s incredible range of current sensors, which measure from a few hundred mA to several thousand Amps.

 

The AEMC 8220 Power Quality Meter with MR193 comes with a black 1000AAC/1400ADC current probe. 
 

8220 Features

  • 660 Volts rms or VDC maximum measurement
  • 6500 Amps AC or 1400 Amps DC - probe dependent maximum measurement
  • Displays average, maximum and minimum amps and volts, K-Factor, peak value, and crest factor
  • Displays and calculates watts, VA and VARs, Displacement Power Factor and Power Factor for balanced three phase and single phase
  • Displays total harmonic distortion (THD-R and THD-F) for current and voltage
  • Displays individual harmonic percentage and values for Amps and Volts through the 50th harmonic
  • Displays and captures inrush current phase rotation and RPM
  • Displays temperature in degrees F or degrees C
  • Displays resistance up to 2000 Ohms
  • Conducts continuity and diode tests
  • Stores up to 9 complete sets of readings for all harmonics, amp, power, volt, and other measurements
  • Configurable from front panel or DataView software
  • Includes free DataView software for data storage and download, analysis and report generation, and real time waveform display

Applications

  • Motor start up analysis
  • Determine motor RPM and phase rotation
  • Detect hot spots in equipment and wiring
  • Verification of power distribution circuits
  • Measurement and recording of power system quality (VAR, VA, kW)
  • Energy metering (kWh, VARh, kVAh)
  • In plant troubleshooting of individual machinery and power distribution panels

 

 

Specifications
ELECTRICAL
VOLTAGE (TRMS) Phase-to-Phase: 660 Volts
Phase-to-Neutral: 600 Volts
CURRENT (TRMS) MN Clamp: 5 mA to 100 mA / 120 Amps or 2 to 240 Amps
MR Clamp: 10 to 1000 Amps ac, 10 to 1400 Amps dc
SR Clamp: 3 to 1200 Amps
AmpFlex: 10 to 6500 Amps
FREQUENCY (Hz) 40 to 70 Hertz
OTHER MEASUREMENTS kW, kVAR, PF, DPF, VA, Phase Rotation Temperature, RPM, Resistance, Continuity, and Diode Test
HARMONICS 1st to 50th
SAMPLING FREQUENCY 256 Samples/cycle
DATA STORAGE Stores nine sets of readings for volts, amps, power, and harmonics
POWER SOURCE Six NiMH AA rechargeable battery pack or six 1.5V AA Alkaline batteries
AC Supply: 120 / 230 Volts ac (50 / 60 Hertz)
BATTERY LIFE  ≥ 8 hours with display on
 ≥ 40 hours with display off (recording mode)
MECHANICAL
COMMUNICATION PORT Optically isolated USB
DISPLAY Three-line backlit digital with custom icons
DIMENSIONS
8.3 x 4.3 x 2.4 inches
211 x 108 x 60 millimeters
WEIGHT 1.9 pounds (0.88 kg)
SAFETY RATING EN 61010, 600V Cat. III, IP 54, Pollution Degree 2