AEMC 4610 2135.16 4-Point Ground Resistance Tester Kit 150 Ft Meter
DISCONTINUED

AEMC 4610 2135.16 4-Point Ground Resistance Tester Kit 150 Ft Meter

Your Price: $1,342.68
Not for Sale
Part Number:4187

AEMC 4610 2135.16 4-Point Ground Resistance Tester Kit 150 Ft

The AEMC 4610 4-Point Ground Resistance Tester performs ground resistance, soil resistivity tests, and measures from 10M Ohms to 1999 Ohms.

The 4610 is auto ranging so it automatically finds the best measurement range, and it is easy to use you just simply connect the leads, press to measure, and read.
 
The large LCD is nearly 3/4 of an inch high and also indicates low battery status, over range, test lead shorts, and lead reversals. 3 LED indicators on the front panel constantly warn the user of measurement problems to ensure reliable and accurate tests.
 
4610 Features 
  • Fall of Potential method
  • Measures ground resistance (2 and 3 Point) and soil resistivity (4 Point)
  • Step voltage tests
  • Touch potential measurements
  • Auto Ranging
  • Designed to reject high levels of interference and noise
  • LED on faceplate alerts user of high auxiliary rod resistance, high input noise, and fault connections
  • Battery powered
  • Rugged rainproof and dust-proof field case
  • Can be used for continuity tests on bonding
  • Color coded terminals 
4610 2135.16 Tester Kit Includes
  • 2 - 150 foot red and blue color coded leads on spools 
  • 30 foot green test lead
  • 2 - 14.5 inch T shaped auxiliary ground electrodes
  • Set of 5 spaded lugs
  • 100 foot tape measure
  • Carrying bag  
Applications
The 4610 can be used for the following tests 
  • 3-point measurements of resistance to ground of grids and ground rods
  • 4-point tests
  • Soil resistivity measurements
  • Touch potential measurements (an alternative to 3-point tests in evaluating electrical safety)
  • 2-point tests for continuity on bonding or on pre established grounds
Specifications
Measurement Range
Range 0.00 to 19.99 Ohms / 20.00 to 199.9 Ohms / 200.0 to 1999 Ohms
Measurement Range 20 / 200 / 2000 Ohms
Resolution 10m Ohms / 100 m Ohms / 1 Ohm
Test Current 10 / 1 / 0.1 mA
Accuracy in percent of Reading 2 percent Reading ±1 ct / 3 percent Reading ±3 cts
Accuracy Reference Conditions 23°C ±3K, 50 percent RH ±10 percent, battery at 8V ±0.2V, externa; magnetic field <40A/m, external field <1 V/m, conductor centered, loop resistance noninductive. Accuracy percent of reading
Resistance Measurement Frequency 128 Hertz square wave
Interference Model 4610 rejects high levels of interference voltage (DC, 50 to 60 Hertz, harmonics); DC voltage in series with X:20 Volts AC voltage in series with Y:13 Volts peak AC voltage in series with Z:32 Volts peak
Response Time Approximately 6 seconds for a stabilized measurement
Voltage Withstand 250 Volts ACc with spikes of 3000 Volts AC or 1000
Power Source Eight 1.5 Volts AA batteries; Alkaline recommended; LO BAT indication on LCD
Battery Life 1800 15 second measurements
Fuse Protection High breaking capacity 0.1A, 250V, 0.25" x 1.25"
Mechanical Specifications
Display 7 segment LCD, .71 inches (18 millimeters) high (3-1/2 digit); 2000 counts; LCD also indicates overrange, test lead shorts and lead reversals
Connection Color-coded terminals accept lugs with minutes gap of 6 millimeters or standard 4 millimeters banana jacks
LED Indication 3 LEDs indicate high input noise, high auxiliary rod resistance, open leads, blown fuse
Operating Temperature 14 to 131 degrees F (-10 to 55 degrees C),0 to 90 percent RH
Storage Temperature -40 to 158 degrees F (-40 to 70 degrees C), 0 to 90 percent RH with batteries removed
Dimensions
8.7 x 5.4 x 5.9 inches 
220 x 136 x 150 millimeters
Weight 10 pounds
Case Heavy-duty, ABS
Colors Case: safety yellow; Front panel: gray
Mechanical Shock IEC 68-2-27
Vibration Test IEC 68-2-6
Drop Test IEC 68-2-32
Dielectric Test 3 kV, 50/60 Hertz, 1 minute between four interconnected measuring terminals and any external metal ground
Environmental O-ring sealed against dust and water to IP50 (Protection Index)
Electrostatic IEC801-2
Electromagnetic IEC 801-3
Electric Shcok IEC 801-5
Safety Reference Specifications
Safety Ratings IEC 1010-1 Cat III Pollution Degree 2, 42 Volts
Agency Approvals Emission: EN 50081-1; Immunity: EN 50082-1