AEMC CA7028 2127.82 Wire Mapper Pro LAN Graphical Cable Tester

The AEMC CA7028 Wire Mapper Pro is a structured cable mapping and troubleshooting tester engineered for use on STP, UTP, SSTP and FTP cabling equipped with RJ-45 connectors and wired to either TIA 568A/B (ISO 11801 and EN 50137), USOC or ISDN specifications.

The CA7028 detects shorts, open circuit pairs, crossed pairs, crossed wires, shield faults, split pairs and reversed pairs. It has the ability to indicate and measure the length of a cable under test, using a Velocity of Propagation (Vp) set by the user, from a memory library or manually. The 7028 will measure the length of all 4 pairs of wires in the cable being tested. It also generates a tone which is transmitted through all 4 pairs in the cable under test.

CA7028 Features

Indicates all common wiring faults including opens, shorts, split pairs, crossed wires and reversed pairs
Unique digital and graphical display of fault length and information
Indicates distances to shorts and opens and identifies locations
Tone generator for locating and tracing cables
Service check function to detect 100Mbit+, token ring, telephone, and 10BaseT
Audible and visual warning of live telephone network voltages
Works with all Category 6 cables
High visibility blue electro luminescent backlit display
Active remote identifiers indicate Pass or Fail at remote end
Up to 16 unique remote identifiers available
Works with TIA 568A/B, USOC and ISDN wiring schemes
CE Mark

Applications

Identify LAN wiring faults
Find distances, feet or meters, to opens and shorts
Test patch cords
Test for active service
Trace cable locations
Measure cable length
Map network layout

Specifications
Range	500 feet - 150 meters
Accuracy	±5 percent
Cable Types	UTP, STP, FTP and SSTP
Faults Indicated	Short Circuit Pair, Open Circuit Wire, Short Between Pairs,
Split Pairs, Crossed Pairs, Pair Reversals, Shield Continuity	Split Pairs, Crossed Pairs, Pair Reversals, Shield Continuity
Fault Location	Near End, Remote End, or distance to fault
Fault Display	All fault and setting info displayed textually and graphically
Wiring Schemes	TIA 568A/B, USOC and ISDN
Service Indication	Telephone, 10BaseT, 100Mbit+, Token Ring
Voltage Warning	Audible and visual warning of TNV - Telecom Network Voltage
Test Inhibit	Inhibits testing in the presence of live voltages
Tone Generator	Oscillating 810 to 1110 Hertz
Battery Indicator	0 to 100 percent Bargraph
Power Source	4 x 1.5 Volts AA Alkaline Batteries
Display Backlit	Blue Electroluminescent
Remote Display	Green/Red Pass/Fail LED
Auto-Off	After 3 minutes
Weight	Main unit: 12 ounces - 350 grams; Remote unit: 1.5 ounces - 40 grams